Inside Fit

Blinds are more commonly fitted inside the window frame. Please use your tape to measure the width first and drop last. Measure tight, from wood to wood, inside the frame.

Important: Please ensure you give us your exact (tight) measurements as we will make the necessary deductions off these sizes to allow for the clearance required for installation brackets/fittings.

Important Note for Double Blinds: to accommodate an inside fit, there is a minimum rebate depth of 75mm required to attach the bracket (60mm for bracket and 15mm behind the bracket for clearance). Note however that the window rebate depth should be at least 150mm to avoid the double bracket from protruding past the window frame edge and into the room.

Tip: It’s a good idea to measure the width in three places, top, middle and at the bottom as sometimes there can be small variances. Please take the smallest of the three measurements.

Outside Fit

An outside fit is useful when there isn’t enough space for the head rail to fit internally. Please measure to the outside of your architrave to achieve maximum light control and privacy. If you don’t have architraves we recommend adding 200mm to the window’s width measurement (100mm for each side) and a further 100mm to the drop measurement.

Note: As deductions for installation brackets/fittings are not necessary for an outside fit we make the blinds to the finished measurements that you supply us.

How to Measure or Install a Ready Made Blind – Videos:

Visit our FaceBook page to view our videos on how to Measure for and how to install a ready made blind, or use the links below

• How to Measure a Ready Made Blind: View Video
• How to Install a Ready Made Roller Blind: View Video
• How to Install a Ready Made Venetian Blind: View Video
• How to Install a Ready Made Wooden Venetian Blind: View Video