Honeycomb Blockout Malta

From: $142.00

​Ready Made Honeycomb Pleated Blinds in Block-out Fabric are the ultimate for thermal performance combined with a luxurious look. Consumer NZ recently rated Honeycomb Blinds the best in heat retention of all window coverings
https://www.consumer.org.nz/articles/curtains

Honeycomb Pleated Blinds are ideal for both sun and total light control, and will ensure your privacy at all times. They are made from 100% polyester which is resistant to UV. Control of the blind can be on the left or right side with either a cord lock (located within the headrail) or, with a cleat that is screwed to the window frame. Cleaning of the Honeycomb Pleated blinds can be done by simply sponging with a damp cloth.
See How to Guide
Enter your Cut To Size measurements:

Cut To Size Option:
Enter your custom measurement then ‘Add to Cart’ The standard size required to alter to your custom size will be automatically allocated. There is a $25.00 charge for width alterations and a $25.00 charge for drop alterations. Please refer to our Measuring Guide before entering your sizes.

Max size: 2000w x 2100d (for larger sizing call us on: 0800 77 00 44)

Or, Select a Standard Size blind:

Standard Size Option:
The width listed for our Standard Size blinds does not include the clearance required for installation. If you plan to install a standard size blind inside a frame, please contact us for the clearance requirements.

Clear

Description

Ready Made Honeycomb Blinds with Block-out Fabrics are ideal for both sun and total light control and ensure your privacy at all times. They are made from 100% polyester which is resistant to UV.
Control of the blind can be on the left or right side with either a cord lock (located within the headrail), or with a cleat which can be screwed to the window frame.
Note the head rail, bottom rail, cords and end caps are supplied in white colour.

Measuring guide for a Ready Made Blind

Note: Blind sizes are always measured by the millimetre (mm)

Standard size blinds (mm)

Venetian:

The width listed online for our Standard Size blinds does not include the clearance required for installation. If you plan to install a standard size blind inside a frame (Inside Fit), please contact us for the clearance requirements.

Vertical and Roller Blind:

Standard sizes will be supplied with the width x drop as listed online, this width includes the required clearance for installation.

Cut to size blinds

Blinds “cut to size” will be supplied based on the measurements you supply. Please use the instructions below to measure your window and calculate your measurements.

Tools for measuring

  • Steel measuring tape
  • Pencil and paper

You will need to measure to the nearest centimetre (mm).

Please choose whether you want your blind(s) to fit INSIDE or OUTSIDE your window frame(s).

Important:
The accuracy of your measurements is essential for a correct and proper fit of your blinds. We cannot be accountable for inaccurate measurements, so if you have any doubts be sure to double check before placing your order. As a further safeguard, if you order online we will always phone you to confirm your sizes.

Blind Inside Fit measuring guide
Inside Fit

Blinds are more commonly fitted inside the window frame. Please use your tape to measure the width first and drop last. Measure tight, from wood to wood, inside the frame.

Important: Please ensure you give us your exact (tight) measurements as we will make the necessary deductions off these sizes to allow for the clearance required for installation brackets/fittings.

Important Note for Double Blinds: to accommodate an inside fit, there is a minimum rebate depth of 75mm required to attach the bracket (60mm for bracket and 15mm behind the bracket for clearance). Note however that the window rebate depth should be at least 150mm to avoid the double bracket from protruding past the window frame edge and into the room.

Tip: It’s a good idea to measure the width in three places, top, middle and at the bottom as sometimes there can be small variances. Please take the smallest of the three measurements.

Blind Outside Fit measuring guide
Outside Fit

An outside fit is useful when there isn’t enough space for the head rail to fit internally. Please measure to the outside of your architrave to achieve maximum light control and privacy. If you don’t have architraves we recommend adding 200mm to the window’s width measurement (100mm for each side) and a further 100mm to the drop measurement.

Note: As deductions for installation brackets/fittings are not necessary for an outside fit we make the blinds to the finished measurements that you supply us.

How to Measure or Install a Ready Made Blind – Videos:

Visit our FaceBook page to view our videos on how to Measure for and how to install a ready made blind, or use the links below

  • How to Measure a Ready Made Blind: View Video
  • How to Install a Ready Made Roller Blind: View Video
  • How to Install a Ready Made Venetian Blind: View Video
  • How to Install a Ready Made Wooden Venetian Blind: View Video

Go to Measuring guide for a Ready Made Blind page

Blinds Cleaning and Repair

For sparkling clean blinds Window Treatments’ subsidiary company’s The Blind Care Company, Christchurch and Mr Sparkel, Auckland provide an excellent service.

The Blind Care Company has been operating in Christchurch since 1973 and Mr Sparkel in Auckland since 1989. The helpful, skilled staff of both companies use ultrasonic cleaning for exceptional results and will also undertake any maintenance of blinds of all ages, makes and models.

The Blind Care Company and Mr Sparkel operate under the same principle as Ready Made Blinds – 100% customer satisfaction and can be contacted via any of the following details :

The Blind Care Company – Christchurch
Physical Address :
47 Mandeville Street
Riccarton,
Christchurch (Next to Window Treatments)
New Zealand
Phone : 03 377 0770
Fax : 03 343 0277
Email : christchurch@blindcare.co.nz
Web: www.blindcare.co.nz
Mr Sparkel – Auckland
Physical Address :
14a Omega Street
Rosedale
Auckland 0632
Phone : 0800 11 55 37,
North 09 441 8305,
South & East 09 579 8225,
West 09 838 2233
Fax : 03 343 0277
Email : auckland@mrsparkel.co.nz
Web : www.mrsparkel.co.nz
Mr Sparkel – Wellington
Physical Address :
Unit 40, 55 Percy Cameron Street
Avalon
Lower Hutt 5011
Phone : 04 570 0705
Fax : 03 343 0277
Email : wellington@mrsparkel.co.nz
Web : www.mrsparkel.co.nz

Go to Blinds Cleaning and Repair page

Why choose Ready Made Blinds & Curtains (RMBC)?

Easy to order

Easy to Order
Order over the phone or through the website.
Finance option also available, normal lending conditions apply.

ICONS7

Free Samples
Click on the button below to request free colour samples of blinds and curtains and we’ll post to you ASAP!

Easy to install

Easy to Install
RMBC are supplied with brackets, screws & easy to follow installation instructions. Ready to be installed by yourself or a handyman

Free delivery

Delivery Free of Charge
We deliver free to your door anywhere* in New Zealand via courier.
*some package length restrictions may apply in rural courier delivery areas.

Money Back Guarantee & Warranty
All of our products have a 12 month warranty. In addition, if you’re not satisfied, RMBC will refund your money if the blinds or curtains are returned within 7 days of purchase.
Note: The money back guarantee does not apply to blinds or curtains which have been resized, altered or damaged.

Readmade Blinds and Curtains © 2022. All Rights Reserved. Privacy Policy

Shopping cart
There are no products in the cart!
Continue shopping