Basswood Blinds 50mm White | Ready Made Blinds & Curtains

Basswood Blinds 50mm White

From: $76.00

Ready Made Wood Blinds are manufactured from a timber species called Basswood which is a very hard and stable American hardwood. This makes it an ideal timber for making into blinds.

See How to Guide
Select a Custom Size blind Select a Standard Size blind

Description

Basswood blinds use wands for tilting the slats and cords for raising and lowering the blinds. Tilting controls (wands) are positioned on the Left hand side of the blinds and cords for raising and lowering the blinds are positioned on the Right hand side of the blinds. Our Basswood blinds come complete with a strong steel head rail, fitting instructions, brackets and screws necessary for the installation. Care of the Basswood blinds can be done with regular dusting and occasional wiping of the slats with a damp cloth.

Additional information

Dimensions N/A
Size

500w x 1370d, 500w x 2300d, 700w x 1370d, 700w x 2300d, 900w x 1370d, 900w x 2300d, 1100w x 1370d, 1100w x 2300d, 1300w x 1370d, 1300w x 2300d, 1500w x 1370d, 1500w x 2300d, 1700w x 1370d, 1700w x 2300d, 1900w x 1370d, 1900w x 2300d, 2100w x 1370d, 2100w x 2300d, 2300w x 1370d, 2300w x 2300d

Measuring guide for a Ready Made Blind

Note: Blind sizes are always measured by the millimetre (mm)

Standard size blinds (mm)

Venetian:

The width listed online for our Standard Size blinds does not include the clearance required for installation. If you plan to install a standard size blind inside a frame (Inside Fit), please contact us for the clearance requirements.

Vertical and Roller Blind:

Standard sizes will be supplied with the width x drop as listed online, this width includes the required clearance for installation.

Cut to size blinds

Blinds “cut to size” will be supplied based on the measurements you supply. Please use the instructions below to measure your window and calculate your measurements.

Tools for measuring

  • Steel measuring tape
  • Pencil and paper

You will need to measure to the nearest centimetre (mm).

Please choose whether you want your blind(s) to fit INSIDE or OUTSIDE your window frame(s).

Important:
The accuracy of your measurements is essential for a correct and proper fit of your blinds. We cannot be accountable for inaccurate measurements, so if you have any doubts be sure to double check before placing your order. As a further safeguard, if you order online we will always phone you to confirm your sizes.

Blind Inside Fit measuring guide
Inside Fit

Blinds are more commonly fitted inside the window frame. Please use your tape to measure the width first and drop last. Measure tight, from wood to wood, inside the frame.

Important: Please ensure you give us your exact (tight) measurements as we will make the necessary deductions off these sizes to allow for the clearance required for installation brackets/fittings.

Important Note for Double Blinds: to accommodate an inside fit, there is a minimum rebate depth of 75mm required to attach the bracket (60mm for bracket and 15mm behind the bracket for clearance). Note however that the window rebate depth should be at least 150mm to avoid the double bracket from protruding past the window frame edge and into the room.

Tip: It’s a good idea to measure the width in three places, top, middle and at the bottom as sometimes there can be small variances. Please take the smallest of the three measurements.

Blind Outside Fit measuring guide
Outside Fit

An outside fit is useful when there isn’t enough space for the head rail to fit internally. Please measure to the outside of your architrave to achieve maximum light control and privacy. If you don’t have architraves we recommend adding 200mm to the window’s width measurement (100mm for each side) and a further 100mm to the drop measurement.

Note: As deductions for installation brackets/fittings are not necessary for an outside fit we make the blinds to the finished measurements that you supply us.

How to Measure or Install a Ready Made Blind – Videos:

Visit our FaceBook page to view our videos on how to Measure for and how to install a ready made blind, or use the links below

  • How to Measure a Ready Made Blind: View Video
  • How to Install a Ready Made Roller Blind: View Video
  • How to Install a Ready Made Venetian Blind: View Video
  • How to Install a Ready Made Wooden Venetian Blind: View Video

Go to Measuring guide for a Ready Made Blind page

Blinds Cleaning and Repair

For sparkling clean blinds Window Treatments’ subsidiary company The Blind Care Company, Christchurch and Mr Sparkel, Auckland provide an excellent service.

The Blind Care Company has been operating in Christchurch since 1973 and Mr Sparkel in Auckland since 1989. The helpful, skilled staff of both companies use ultrasonic cleaning for exceptional results and will also undertake any maintenance of blinds of all ages, makes and models.

The Blind Care Company and Mr Sparkel operate under the same principle as Ready Made Blinds – 100% customer satisfaction and can be contacted via any of the following details :

The Blind Care Company – Christchurch
Physical Address :
47 Mandeville Street
Riccarton,
Christchurch (Next to Window Treatments)
New Zealand
Phone : 03 377 0770
Fax : 03 343 0277
Email : christchurch@blindcare.co.nz
Web: www.blindcare.co.nz
Mr Sparkel – Auckland
Physical Address :
14a Omega Street
Rosedale
Auckland 0632
Phone : 0800 11 55 37,
North 09 441 8305,
South & East 09 579 8225,
West 09 838 2233
Fax : 03 343 0277
Email : auckland@mrsparkel.co.nz
Web : www.mrsparkel.co.nz
Mr Sparkel – Wellington
Physical Address :
Unit 40, 55 Percy Cameron Street
Avalon
Lower Hutt 5011
Phone : 04 570 0705
Fax : 03 343 0277
Email : wellington@mrsparkel.co.nz
Web : www.mrsparkel.co.nz

 

Where to go for Blind Cleaning and Repair

Go to Blinds Cleaning and Repair page

Why choose Ready Made Blinds & Curtains (RMBC)?

Readymade Blinds and Curtains © 2024. All Rights Reserved. Privacy Policy

0
    Your Cart
    Your cart is emptyReturn to Shop